100A MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 100A 12/24V

- Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. - Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. - Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. - Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. - Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Specifications: Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 100A battery 12V photovoltaic system: power is respectively 100-1000W 100A battery 24V photovoltaic system: power is respectively 200-2000W Package Included: 1X Solar Panels Battery Charge Controller 1X User Manual ======================================================================== Features: 1.Build-in industrial micro controller. 2.Big LCD display,all adjustable controlling parameter of the system. 3.Fully 4-stage PWM charge management. 4.Build-in all necessory protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. 5.Dual mosfet Reverse current protection ,low heat production LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value. System Connection: 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3.Connect the consumer to the charge regulator - plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Attention: 1.press the [Down] button to ON/OFF load manully at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications: Load: Light Control MPN: RBL Charging Mode:PWM Model:RBL-100A System Voltage:12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 650W(12V system); 1300W(24V system) Equalization:12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge:13.7V(defaul,adjustable),12.0-15.0V Discharge stop voltage:10.7V(defaul,adjustable),9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable),11.0-13.0V Rated current: 60A Self-consume:<10mA Batteries:Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output:5V/2A Max Dimension:13.4*7*3.3cm Package includes: 100A Solar Charge Controller*1 User Manual*1

You recently viewed

Clear recently viewed

30-day Return Policy

If you are not satisfied with your shopping experience, we will always pay for the return shipping, and give you a full refund on your purchase, every time!

Lowest Pricing Guaranteed.

We utilize partnerships with wholesale warehouses across the nation, which allows us to provide the lowest price possible on the best name brand products available!

Located In USA

All of our products are warehoused here in the US, and ship directly from our facilities to you. You can rely on the fastest, safest, and most efficient shipping!

Contact us

Give us a call! A representative can assist you between the hours of 9AM-6PM PST. Monday-Saturday Toll Free Number: 1 866 227-1583